Instagram Facebook Tiktok Youtube

LikeTaCon Pro & Comfort

Wienhoff control technology

The WieTaCon 12-1 terminal is equipped with two different software versions, WieTaCon Comfort or Pro. In addition to the terminal, depending on the equipment and software variant, there is a matching control box to enhance the ease of use.

HowTaCon COMFORT

The WieTaCon Comfort control unit is essentially operated in the 3 menus (basic menu, suction menu & application menu). The operator can store the functions required for the respective action in the individual menus. This keeps the control system clear and easy to use.

The WieTaCon Comfort control unit is essentially operated in the 3 menus (basic menu, suction menu & application menu). The operator can store the functions required for the respective action in the individual menus. This keeps the control system clear and easy to use.

The WieTaCon Comfort control unit is essentially operated in the 3 menus (basic menu, suction menu & application menu). The operator can store the functions required for the respective action in the individual menus. This keeps the control system clear and easy to use.

General device and diagnostic settings

Adjusting the installed sensors

Tire control system settings depending on equipment

LikeTaCon PRO

  • The respective folding functions are available in the basic menu of the spreader.
  • the fill level is adjustable
  • 4 buttons can be freely assigned with various functions
  • Performance data such as speed, quantities, areas, working width, time, date and switched headlights and rotating beacon are visible.
  • The fill level can be set in the suction menu
  • 4 buttons are freely assignable especially for the menu
  • All functions required for vacuuming are available and operable
  • Pump speeds, cutter and turbine speeds can be variably adjusted during suction, depending on the equipment
  • Overview of the performance data remains unchanged
  • Application rates and distributor speeds can be variably adjusted during application
  • Information about performance data is retained
  • Monitoring units of the pump drive are displayed
  • All functions are switched in automatic processes such as spreading start or headland management
  • 4 buttons are free to be assigned again for dispensing
  • All functions in the submenus are designed as "manual functions" so that only the desired function can be operated during maintenance and repair work
  • Diagnostic menus are also available so that all sensors can be checked from the cab

Various functions of the slurry tanker, such as the tire regulator, can be parameterized in the submenu.

  • The control of the drive axle is fully integrated in the control unit
  • In the manual menu of the drive axle, the drive axle can also be engaged manually in the event of simple faults
  • Information on the drive axle and its condition is visible
  • Adjustment options for the drive axis such as lead, maximum drive force or automatic engagement available
  • The electronic steering control is fully integrated into the control unit
  • The electronic steering is operated in the basic and application menu via an additional control box
  • In the manual menu of the electronic steering, manual operation of the steering is possible and all information can be displayed

Additional control panel

CAN - Variant 1 / Single articulated docking arm

  • Suction start-stop
  • Undocking arm - ventilation and unlocking
  • Docking arm lifting/lowering
  • Hoist up/down
  • Linkage release +
  • Auto-folding linkage (optional)
    Headland management
  • Spreading Start - Stop
  • Partial width left - right

CAN - Variant 2 / Double hinged docking arm

  • Suction start-stop
  • Undocking arm - ventilation and unlocking
  • Joystick for docking arm
  • Hoist up/down
  • Linkage release +
  • Linkage auto-folding (optional)
  • Headland management
  • Spreading Start - Stop
  • Partial width left - right

CAN - variant 3 / docking crane, analog joystick

  • Suction start-stop
  • Undocking arm - ventilation and unlocking
  • Analog joystick for
  • Docking crane
  • Hoist up/down
  • Linkage release +
  • Linkage auto-folding (optional)
  • Headland management
  • Spreading Start - Stop
  • Partial width left - right


The external control panel has three buttons and a two-axis joystick whose assignment can be freely selected in the control system.

It is only available for the WieTaCon Comfort or Shuttle control unit.

All services at a glance

  • Pro
  • Comfort
HowTaCon ProComfort
HowTaCon
Anti-glare color 7" touch display
Good reading angle
Adjustable display brightness
12 illuminated direct selection buttons
1 rotary push button
Emergency stop quickly accessible
USB
Camera
CAN
ISOBUS-capable (Aux-N, TC-BAS, TC-GEO, TC-SC)
NIR sensor-capable
Combination with external control panel
Convenient and intuitive operation thanks to practical menu navigation and large icons in the buttons
Display of all relevant machine information
Automatic function sequences:
Suction
Flaps
Spreading
Headlandself-programmable
Application rate control
Application rate display
Machine operation and camera display possible at the same timePartly
Documentation
Safety circuit: road, field
Software individually customizable

Are you interested?

Are you already interested in our products, the technologies we use or their possible applications? Perhaps you also have questions about services, equipment options or would like a personal consultation? Nothing could be easier - just get in touch with us! We look forward to hearing from you!